PoE Managed Switch 30 Port 2.5G
This series of switches is a new generation of high performance and large capacity Ethernet switches launched , equipped with its own modular operating system, providing larger table specifications, faster hardware processing performance and more convenient operation experience.
The device provide 24 port 2.5G copper port and 6 Port GE/10G SFP+ port,In addition to supply PoE+ and PoE+ + (IEEE802.3af/at/bt). It supports virtualization stacking , rich L3 routing protocol, industrial-grade Ethernet ring network and other functions. Enable this series of products to meet the application requirements of various complex scenarios.
Spesifications
Product Advantage
Appearance
Spesifications
Device Specifications
| Model | CLD-2.5G-24POE-6SFP-IND | |
|---|---|---|
| I/F | Down link | 24*100M/1G/2.5G BASE-T |
| Up link | 6*S FP+ | |
| CONSOLE | x1 | |
| PoE | 8*POE++/90W Max 16*POE+/30W Max | |
| Ethernet performance | Forwarding rate | 90 Mpps |
| Switching capacity | 120Gbps | |
| Jumbo Frame | 9KB | |
| MAC Table | 16KB | |
| Buffer | 1.5MB | |
| L3 tables | 8K | |
| ARP table | 12K | |
| S VI | 1K | |
| Power | PS U | AC100-240V,50HZ,100W |
| Power Consumption | <85W(no PD device) | |
| MTBF | MTBF | 400K Hr Telcordia SR-332 |
| Dimensions | LxWxH(mm） | 440*280*44 |
| Working Temperature | 0℃～45℃ | |
| Altitude of 1800~5000m: for 220m, the maximum temperature decreases by 1℃. | ||
| Working humidity | 10% ~ 90% RH | |
| Storage temperature | -40~70℃ | |
| Store humidity | 5% ~ 95% RH | |
| Work altitude | -500~5000m(For each 220m elevation, the maximum temperature is decreases by 1℃) | |
| Dust prevention | Under static conditions, the number of dust particles of 0.5 µ m in the air of the main machine room is less than 18,000 grains / l | |
Product Advantage
Carrier-level reliability
- Based on Hitless Protection System (HPS),the key components such as power supply modules, are redundant backup and hot- swappable, which supports seamless switchover in case of failure without manual intervention.
- Supports STP/RSTP/MSTP, VRRP, ring network protection, dual uplink active/standby link protection, LACP and other simple and efficient redundancy protection mechanisms.
Intelligent stacking
- Multiple switches that support stacking features are combined tog ether and logically combined into one virtual The stacking system improves the reliability of the equipment level through redundant backup between multiple member devices;
Perfect security mechanism
- With a variety of internal mechanisms can effectively prevent and control the spread of viruses and hacker attacks, such as the prevention of DoS attack, anti- hacker IP scanning mechanism, port ARP message legitimacy check, a variety of hardware ACL strategy, etc., but also the network a green;
IPV 4 / IPV 6 double stack
- Hardware supports IPv4 / IPv6 dual protocol stack multi- layer line speed exchange, hardware distinguishes and processes IPv4 and IPv6 protocol messages, can plan the network or maintain the network status quo according to the requirements of IPv6 network, and provide flexible IPv6 network communication scheme. Support for a rich IPv4 / IPv6 protocol;
Strong business support
- Support IPv4, IPv6 multicast function, including rich multicast Such as IGMP Snooping , IGMP, MLD, PIM, PIM for IPv6, and other protocol families；
- Support IGMP source port and source IP check function, effectively eliminate illegal multicast source, improve the network Support the rich three- layer features and service features such as equivalent routing , to meet the communication needs under different network link planning ；
Po E+ + support( Only Po E Model)
- Support 3af/at/bt standard, Single port supports up to 90W；
- In the PoE model, in addition to 16 ports support PoE + , another 8 ports support PoE + + ；
Appearance
Device Specifications
| No | Name | Description |
|---|---|---|
| 1 | G1-16 | 16-port 2.5GE PoE with 802.3af/at standard |
| 2 | G17-24 | 8-port 2.5GE PoE with 802.3bt standard |
| 3 | RJ45 port LED | LINK/ACT indicators of RJ45 ports Press SWAP button to change the LED to NET indicator or PoE indicator. |
| 4 | TE1-6 | 6-port 10GE SFP+ |
| 5 | CLI | CLI port, at rate of 9600bps |
| 6 | SFP+ port LED | LINK/ACT indicators of SFP+ ports |
| PWR LED | Power Indicator: when the device is powered on normally, the indicator is always on | |
| SYS LED | System Indicator: when system starts up normally, the indicator flashes. | |
| PoE LED | LINK/ACT indicators of RJ45 ports Press SWAP button to change the LED to NET indicator or PoE indicator. | |
| SWAP |
| No. | Name | Description |
|---|---|---|
| 1 | AC power jack | AC220V power socket |
| 2 | Grounding column | The grounding must be fine. |
Relate Product
Pre-sales engineering and technical support
Cloudtronics are able to offer pre-sales support on all related aspects of FluidMate.
Our toll free number for Indonesia wide is +62 21 5095 9964